Our Trench Hawk may well be the perfect antidote to the raw terror of eyeball to eyeball combat in the confined spaces of a trench, bunker, alley or narrow hallway.
All it takes is one stroke from either the vicious cutting edge or its brutal wedge shaped spike to end the fight, and if the party starts at longer range the Trench Hawk's twin "business ends" make an accurate throw a breeze, since there's double the chance of a lethal hit. When used defensively, the Trench Hawk's cutting edge and spike also provide a big advantage, as either can be used for hooking or trapping and, like our Spike Hawk, their combined length can be used to parry or block an incoming blow.
Drop forged from 5150 carbon steel and differentially hardened, the head of the Trench Hawk will withstand tremendous blows and the awful stress of continued throwing.
The handle of the Trench Hawk is also highly resistant to shock and impact and will withstand abuse that would easily break even a tough hickory handle. And, as an added benefit, is easily and cheaply replaced when finally worn out or broken from repeated throwing (NOTE: any handle can, and will, break eventually).
Finally, to help protect its owner from its cutting edge and dangerously sharp spike, it comes with a patented Secure- Ex™ sheath that features a cleverly articulated design.
|Steel||Drop Forged 1055 Carbon|
|Country of Origin||Taiwan|
Replacement Trench Hawk Handle - Product Code: H90PTH
These superb tomahawks axes and hammers are precision drop forged from 1055 Carbon steel. Drop forging is, without doubt, the best method of manufacture for any impact tool, particularly one with a cutting edge. During the forging process a metal ingot is heated almost white hot and then formed into shape in a series of progressive dies. The large steel dies are fixed to enormous compressed air hammers. Each die hammers the hot metal into a gradually more finished shape. The steel is kneaded and compressed into a completely homogenous mass making the grain structure uniform and minimising gas pockets or other imperfections that can ruin the construction of a hand forged hawk. This is why most good axes, hatchets, and hammers are drop forged. These hawks are differentially heat treated. This means that the cutting edge and hammer face is fully hardened, while the balance is left relatively soft to absorb the shock of striking blows.